Detaching And Refitting Cis - Kyocera TASKalfa 620 Service Manual

(3) Detaching and refitting CIS

Follow the procedure below to clean or replace CIS.
Procedure
1. Open the document processor top cover.
2. Remove two screws and then remove the
original switchback guide.
3. Remove the screw.
4. Release the triangular mark inserted part
using the flat-blade screwdriver and remove
the DP front cover.
Figure 1-5-163
Screw
Figure 1-5-164
Original switchback guide
Inserted part
DP front cover
2KN/2KP
1-5-79