Kyocera TASKalfa 620 Service Manual page 111

Maintenance
item No.
Setting stamp mode ON/OFF
U281
Description
Sets ON/OFF of the stamp mode.
Purpose
To turn the setting on, in order to manage, by which machine it was printed.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Display
ON
OFF
STAMP NUMBER
Initial setting: OFF
When setting turns to ON, set a stamp number using the numeric keys.
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
Setting the black line cleaning indication
U326
Description
Sets whether to display the cleaning guidance when detecting the black line.
Purpose
Displays the cleaning guidance in order to make the call for service with the black line decrease by the rubbish
on the contact glass when scanning from the DP.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Display
ON
OFF
COUNT
Initial setting: ON
Setting count value is displayed only if the setting is ON.
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Setting the count value
1. Enter a three-digit value using the # or * key, or numeric keys. and then press the start key. The value is
set.
The setting value x 1000-sheet is possible for a display setting count value.
When reading a display setting count value is done, black line cleaning indication is displayed in auto-
matically. If the black line is detected, black line cleaning guidance is displayed in automatically when
reading the a display setting count value is done from that point.
When setting is 0, the black line cleaning indication is displayed only if the black line is detected.
2. To clear the count, press the reset key and then press the start key. The count is cleared and the screen
for selecting a maintenance item is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
Description
Description
A stamp function is used.
A stamp function is not used.
Number of stamp.
Description
Displays the cleaning guidance
Not to display the cleaning guidance
Setting counts of the cleaning guidance indication
2KN/2KP
1-3-73