Initial Connection; Power Management; Power On; Power Down - Xerox WorkCentre 5755 System Administrator Manual

Device Connection and Quick Setup

Initial Connection

Follow these steps to physically connect your device to the network.
1. Connect the Power Cable
Ensure the device is connected to a suitable power supply and that the power cord is fully plugged
in to the electrical outlet.
2. Connect the Ethernet Cable
Connect a 10/100/1000 BaseT Ethernet cable to the Ethernet port at the rear of the device and
the other end of the cable to your network port.
3. Power On the Device
The Power On button is located on the left-side of the device.

Power Management

Power On/Off Button and Energy Saver Button
The Power On/Off button (located on the left hand side of the device) and the Energy Saver button
(located on the control panel on the top left) controls the application of standby operating power to
each of the system modules and initiates the sequences required to bring the device to an operational
state. If the button is pressed when the device is operational, the following can be initiated:
• Energy Saver - ends the current session and keeps the device running on low power. When in
Energy Saver Mode, press any key or touch the screen to wake the device up.
• Quick Restart - the system powers down followed by an automatically initiated Power On
sequence. Any jobs in progress will be lost. Quick Restart may be helpful if experiencing problems
with the operation of the device.
• Power Down - the system ends the current session and powers itself off in an orderly manner.

Power On

At the Device:
1. Ensure that your device is connected to a suitable power supply and that the power cord is fully
plugged in to the electrical outlet of the device.
2. Press the <Power On/Off> button. The entire powering on process (to power on all installed
options) takes less than three minutes.

Power Down

At the Device:
1. Press the <Power On/Off> button, the Power Down Options screen displays.
2. Touch [Power Down].
3. The Power Down Confirmation screen displays.
Note: If the are any jobs in the queue, confirming power down will result in the deletion of any
currently in the queue.
8 Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide