Windows 2000/2003/Xp/Vista Environment; Information Checklist; For Static Ip Address - Xerox WorkCentre 5755 System Administrator Manual
Hide thumbs
Also See for WorkCentre 5755:
- System administrator manual (362 pages) ,
- User manual (328 pages) ,
- Information manual (50 pages)
Table of Contents
Advertisement
Network Installation
Windows 2000/2003/XP/Vista Environment
Information Checklist
Before starting the procedure, ensure the following items are available or tasks have been performed:
For Static IP Address
• Existing operational network utilizing the TCP/IP
protocol.
• Ensure that the device is connected to the
network.
• Static IP Address for the device.
• Subnet Mask Address for the device.
• Gateway Address for the device.
• Host Name for the device.
• Ethernet Cable.
• Print and Fax Drivers CD (delivered with your
device).
For Static IP Address
Note:
To configure this feature or these settings access the Tools pathway as a System
Administrator. For details, refer to
1.
From the Tools pathway, touch [Network Settings].
2.
Touch [Network Setup].
3.
Touch [TCP IP].
4.
Touch [TCP/IP Settings].
5.
Touch [TCP/IP Enablement], the TCP/IP Enablement screen displays.
a.
Touch [Enable] for IPv4 and IPv6.
Note:
Any changes to the IPv6 feature will result in a reboot of the Network Controller.
b.
Touch [Save].
6.
Touch [Automatic Addressing].
a.
Touch [Disabled] to disable Automatic Addressing.
b.
Touch [Save].
7.
Touch [IP Address/Host Name], the IP Address/Host Name screen displays.
a.
For IPv4 Address, touch each octet and enter the IP address using the numerical keypad.
b.
For Host Name, touch the detail bar.
Enter Host Name using the on-screen keyboard. To access more characters, touch [123] on
c.
the user interface.
d.
Touch [Save], then touch [Save] to return to the TCP/IP Settings screen.
58
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
For Dynamic IP Address
• Existing operational network utilizing the TCP/IP
protocol.
• A DHCP, BOOTP or RARP Server should be
available on the network.
• Ensure that the device is connected to the
network.
• Ethernet Cable.
• Print and Fax Drivers CD (delivered with your
device).
Access Tools Pathway as a System Administrator
on page 10.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
