Configure A Fax Repository Using Smb - Xerox WorkCentre 5755 System Administrator Manual

• Authenticated User and Domain - select this method to be used in conjunction with the
network accounting or another authentication method, such as Secure Access, to
validate the user.
• Authenticated User - when selected, the device will prompt to log in using your own
network credentials.
• System - selecting this method allows the device to authenticate to the server with the
credentials entered in the [Login Name], [Password] and [Retype Password] entry
fields.
h. Check the [Select to save new password] checkbox, if you want to change the password for
an existing Login Name.
5. Click on the [Apply] button to accept the changes.
6. Configure the Default settings. Refer to

Configure a Fax Repository using SMB

Information Checklist
Before starting the procedure, ensure the following items are available or tasks have been performed:
• Create a shared folder to be used as a fax repository. Note the Share Name of the folder and the
Computer Name or Server Name.
• Create a user account and password for the device with full access rights to the fax repository.
Note the user account and password.
• Test the settings by attempting to connect to the shared folder from another PC by logging in with
the user account and password. Create a new folder within the directory and then delete the
folder. If you cannot perform this function check the user account access rights.
Enter the Fax Repository Details Using Internet Services
At your Workstation:
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to
1. From the Properties tab, click on the [Services] link.
Click on the [Server Fax] link.
2.
3. Select [Fax Repository Setup] in the directory tree.
4. In the Settings area:
a. Select SMB from the [Protocol] drop-down menu.
b. Select either [IPv4 Address] or [Host Name].
c. Enter details of the Repository Server in the IP Address: Port or Host Name: Port field.
d. Enter details of the Share name in the [Share] field.
e. Type in the path to the location of the repository server in [Document Path]. For example:
/(directory name)/(directory name).
f. In the [Login Credentials to Access the Destination] area, select one of the following:
Configure Default Settings
Access Internet Services as System Administrator
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
on page 284.
on page 16.
System Administrator Guide
Server Fax
281