Xerox WorkCentre 5755 System Administrator Manual page 222

Workflow Scanning
7. Enter details in the [Login Name], [Password] and [Retype Password] field.
Note: A Login (account) Name and (server) Password is required for the system to access the
remote server. This is mandatory for use with a SMARTsend server. For information on creating
accounts on the SMARTsend server, refer to the FreeFlow SMARTsend Installation and
Administration Guide. Note that these accounts directly support the Login Source settings,
accessed by clicking General under Workflow Scanning in Internet Services.
8. Check the [Select to save new password] checkbox if you need to change the password for an
existing Login Name.
9. Click on the [Apply] button to accept the changes or [Undo] to return the settings to their
previous values.
10. Click on the [OK] button when you see the message "Properties have been successfully
modified".
HTTP or HTTPS
1. From the Template Pool Setup page, in the Settings area, select [HTTP] or [HTTPS] from the
Protocol drop-down menu.
2. Select either the [IPv4 Address], [IPv6 Address] or [Host Name].
3. Enter the details in the [IP Address: Port] or [Host Name: Port] field of the server.
4. In the [Script path and filename (from HTTP root)] field enter the path and file name of the
POST handling script or application used for filing. The script allows file transfers with the server.
For example: /directory name/folder name).
Click on the [Get Example Scripts] link to download a working example script.
5. Type in the path to the location of the scan folder in [Document Path]. Enter the full path to the
directory, starting at the root. For example, \\directory name\folder name.
6. If HTTPS is selected as a protocol, check the [Validate Repository SSL Certificate (trusted, not
expired, correct FQDN)] checkbox to have the server's SSL certificate validated for the correct
host name and checked for a signature of a trusted certificate authority.
7. For Login Credentials to Access the Destination, select [System] to have the system directly log
in to the file server.
8. Enter details in the [Login Name], [Password] and [Retype Password] field.
Note: A Login (account) Name and (server) Password is required for the system to access the
remote server. This is mandatory for use with a SMARTsend server. For information on creating
accounts on the SMARTsend server, refer to the FreeFlow SMARTsend Installation and
Administration Guide. Note that these accounts directly support the Login Source settings,
accessed by clicking General under Workflow Scanning in Internet Services.
9. Check the [Select to save new password] checkbox if you need to change the password for an
existing Login Name.
10. Click on the [Apply] button to accept the changes or [Undo] to return the settings to their
previous values.
11. Click on the [OK] button when you see the message "Properties have been successfully
modified".
214 Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide