Configuring Embedded Fax Settings; Incoming Fax Defaults - Xerox WorkCentre 5755 System Administrator Manual
Hide thumbs
Also See for WorkCentre 5755:
- System administrator manual (362 pages) ,
- User manual (328 pages) ,
- Information manual (50 pages)
Table of Contents
Advertisement
Embedded Fax
Select the Fax Country Setting
At the Device:
Note:
To configure this feature or these settings access the Tools pathway as a System
Administrator. For details, refer to
1.
From the Tools pathway, touch [Service Settings].
2.
Touch the [Fax Settings] to display the Embedded Fax Settings screen.
3.
Touch the [Fax Country Setting], to display the Fax Country Setting screen.
4.
Select the relevant country from the Country Selection list.
5.
Touch [Save] to return to the Fax Settings screen.
Configuring Embedded Fax Settings
At the Device:
Note:
To configure this feature or these settings access the Tools pathway as a System
Administrator. For details, refer to
1.
From the Tools pathway, touch [Service Settings].
2.
Touch the [Fax Settings] to display the Embedded Fax Settings screen.
3.
Select [Line Configuration] to display the Fax Line Setup screen.
a.
Touch either [Line 1] or [Line 2] for Line Setup.
Note:
Line 2 will be available if a Line 2 Fax Kit has been purchased and installed on the device.
b.
Touch [Fax Number] type-in region and enter the fax number using the on-screen keypad.
c.
Touch [Save].
Touch [Fax Line ID] type-in region and enter the Line Name using the on-screen keyboard. A
d.
maximum of 30 characters can be entered.
e.
For [Options], select one of the following options for sending and receiving fax:
•
Send and Receive - the device is capable of sending and receiving fax transmissions.
•
Send Only - the device is only capable of sending faxes.
•
Receive Only - the device is only capable of receiving faxes.
f.
For Dial Type, select either [Tone] or [Pulse].
g.
Touch [Save] to return to Fax Settings screen.
Incoming Fax Defaults
Use this feature to configure settings for incoming faxes.
At the Device:
Note:
To configure this feature or these settings access the Tools pathway as a System
Administrator. For details, refer to
From the Tools pathway, touch [Service Settings].
1.
2.
Touch the [Fax Settings].
266
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
Access Tools Pathway as a System Administrator
Access Tools Pathway as a System Administrator
Access Tools Pathway as a System Administrator
on page 10.
on page 10.
on page 10.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
