Upgrade Through Usb - Xerox WorkCentre 5755 System Administrator Manual

Software Upgrade
6. In the Auto Upgrade area:
a. Check the [Enabled] checkbox to enable the Schedule Upgrade feature.
b. For Refresh Start Time, select either [Hourly] or [Daily].
c. If [Daily] has been selected, enter the required time of the day for the upgrade to be
performed.
d. For [Protocol], select either [IPv4 Address], [IPv6 Address] or [Host Name].
e. Enter the details in the [IP Address: Port] or the [Host Name: Port] of the server where the
software upgrade file (obtained earlier) is located.
f. Enter the path to the upgrade file on the server in the [Directory Path] field.
g. Enter the [Login Name] and [Password] for the server.
h. Click on the [Apply] button to accept the changes.
The upgrade will now be performed automatically on the device at the time specified. When the
upgrade process starts network connectivity with the device will be unavailable, including access
from Internet Services. The upgrade progress can be monitored from the device screen interface.
Note: Software Installation will begin several minutes after the software file has been submitted
to the device. When Installation has begun all Internet Services from this device will be lost,
including this web user interface. The installation progress can be monitored from the local user
interface.

Upgrade Through USB

This section provides instructions to upgrade machine software via the Utilities Software Upgrade Tool
installed on a workstation or laptop and connected to the machine via a USB cable.
Note: This procedure will delete any current jobs in the machine print queue and prevent further
jobs from printing until the upgrade has completed. If you wish to preserve these jobs, allow them
to complete before upgrading your software.
All configured network settings and installed options will be retained by the machine after the
Software Upgrade process.
Information Checklist
Before starting the procedure, ensure the following items are available or tasks have been performed:
• A type A-B USB Cable.
• The Utilities CD3 delivered with your machine. The Utilities CD contains the tool used for
performing machine software upgrades.
• A laptop or workstation (close to the machine) that supports USB connectivity.
• The software upgrade file obtained from your Customer Service Representative. The file will have
an extension .UGD (upgrade). It is important to obtain the correct upgrade file for your particular
model of machine.
• If you are performing the upgrade on a networked (connected printer) device, ensure the device is
online before continuing.
326 Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide