Page 1
Xerox WorkCentre 5765/5775/5790 User Instructions Make a Copy Using the Automatic Document Feeder (ADF) Place the originals face-up in the Automatic Document Feeder (ADF), typically in portrait orientation. If necessary, press the [Services Home] button on the Control Panel, and then select the [Copy] tab on the Touch Screen.
Page 2
How to set up a speed dial If necessary, press the [Services Home] button on the Control Panel, and then select the [Fax] tab on the Touch Screen to display the Fax options. From the Address Book Setup screen, enter an Address Book number or select one from the Address Book list.
Page 3
To send a fax to a single recipient: 1. If necessary, press the [Services Home] button on the Control Panel, and then select the [Fax] tab on the Touch Screen to display the Fax options. 2. Using the alphanumeric keypad, enter the fax phone number, and then press the [Start] button to send the fax.
Page 4
5. Enter the fax number in the Enter Number and Press Add field using the numeric keypad. Use the [C] button to delete an incorrect entry, or to clear the entire entry select the [X] button. 6. Select [Save]. The new entry will be displayed in the list. 7.
Page 5
How to Scan to E-mail 1. Load the original(s) face-up in the Duplex Automatic Document Feeder (DADF), or place a single original face-down on the Document Glass. 2. Press the [Services Home] button on the Control Panel. 3. Select [Email] on the Touch Screen. 4.