Configuration Cloning - Xerox WorkCentre 5755 System Administrator Manual

Configure the Print Driver - Manually
To configure the Print Driver without using bi-directional communication return to the Configuration
tab within the Properties of the Print Driver.
1. Click on [Installable Options].
2. Select the options that are installed on the device.
3. Click on [OK].
4. Click on the [General] tab.
5. Click on [Print Test Page].
6. Click on [OK] to close the Properties box.
7. Right-click the printer icon within the Printers folder and select [Printing Preferences].
8. For Default Settings, select any required default settings in the Print Driver.
Verify the Test Page printed at the machine.

Configuration Cloning

If you are installing multiple machines on your network you may find the Cloning feature useful. This
feature allows you to copy configuration settings from one machine to another. For further information
enter the word cloning in the search tool.
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
Network Installation
System Administrator Guide
63