Network Installation
•
An existing operational AppleTalk® network.
•
The AppleTalk Name you wish to assign to your printer.
•
The AppleTalk Zone (if used) in which your printer will reside.
•
Ethernet Cable.
•
The CentreWare Print and Fax Drivers CD (delivered with your machine). Review any README file
contained with the Print Drivers.
At the Machine
Note:
To configure this feature or these settings access the Tools pathway as a System
Administrator. For details, refer to
From the Tools pathway, touch [Network Settings].
1.
2.
Touch [Network Setup].
3.
Touch [AppleTalk Settings]. The AppleTalk (R) Settings screen displays.
a.
Touch [AppleTalk (R) Enablement].
b.
Touch [Enable].
c.
Touch [Save] to return to the AppleTalk (R) Settings screen.
d.
Touch [Name and Area].
e.
Touch the text field for [Printer Name]. Touch [Clear Text] to clear default name (the printer
default is * which means the printer will appear in ALL zones) and enter the desired text using
the on-screen keyboard. When finished touch [Save].
f.
Repeat previous step for Area Name.
g.
Touch [Save].
h.
Touch [Close].
Press the <Log In/Out> button.
4.
5.
Touch [Logout] to exit the Tools pathway.
Wait five minutes for the machine to reboot.
6.
Press the <Machine Status> button.
a.
Touch [Machine Information] tab.
b.
Touch [Print Reports].
c.
Touch [Print Report].
The Configuration Report will print. On the report verify the details under Network Setup
heading are correct.
d.
Touch [Close].
Install Print Drivers
Information Checklist
•
Ensure TCP/IP settings are correctly configured on the device.
•
Locate the Print and Fax Drivers CD delivered with your device.
78
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
Access Tools Pathway as a System Administrator
on page 10.