Xerox WorkCentre 5755 System Administrator Manual page 246

E-mail
• To use host names, DNS must be configured on the device.
To Configure LDAP Server
At your Workstation:
Note: To configure this feature or these settings access the Properties tab as a System
Administrator. For details, refer to
1. From the Properties tab, click on the [Connectivity] link.
2. Click on the [Protocols] link.
3. Select [LDAP] in the directory tree.
4. To add a new LDAP directory, click on the [Add New] button.
5. In Server Information area:
a. Select either the [IPv4 Address], [IPv6 Address] or [Host Name].
Enter details in the [Friendly Name] field.
b.
c. Enter details of the LDAP server in the IP Address: Port or the Host Name: Port field.
d. Select the server type from the [LDAP Server] drop-down menu.
6. In the Optional Information area:
a. Enter the search directory location of the server where the LDAP information is stored in the
[Search Directory Root] field.
b. For Login Credentials to Access LDAP Server, select one of the following:
• None - if no login is required.
• Authenticated User - the device will use the login details entered by the user to access
the LDAP server. This option requires Authentication to be configured on the device.
• System - if selected the device will specify the LDAP server login details and enter the
required information in the [Login Name] and [Password] fields. Format for the login
name may be login name or domain/login name.
c. Enter a Login Name and Password, if required, for the device to access the LDAP server.
Format for the login name may be login name or domain/login name.
d. For SSL, check the following checkbox:
• Enable SSL - To enable SSL (Secure Socket Layer).
Note: SSL requires a server certificate to be available to the device.
• Validate Repository SSL Certificate - If you want the device to verify that the server
certificate is trusted, valid and has a fully qualified domain name (FQDN).
e. Click on the [View Trusted SSL Certificates] link to view secure certificates that have been
uploaded to the device. (Click the browser [Back] button to return to the LDAP Settings
screen.)
For Maximum Number of Search Results select either [Use LDAP Server Maximum] or
f.
[Maximum Number of Search Results]. If you select the latter, enter the maximum number
of addresses that will appear which match the search criteria selected by the user. Set the
search results to one less than the server will allow. For example, if the LDAP server limit is 75,
set the search results to 74 or less. The range is between 5 and 100.
g. For LDAP Referrals, check the [Enabled] checkbox if the primary LDAP server is connected to
additional servers, the search will continue on those servers as well.
238 Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide
Access Internet Services as System Administrator on page 16.