Show - Symbol WS5000 Series System Reference Manual

8-178
WS5000 Series Switch System Reference Guide
attribute
priority
tos Sets the ToS packet marking bits for packets
marked with the named Classification Group. The
bits value is the
bit-field. For example:
Example
WS5000.(Cfg).PO.[Inbound]> set
config_parameter is a required parameter.
Syntax: set <config_parameter>
Valid commands:
set name
set addcg
set removecg
set cgpktmod
set defaultaction
set ipredirect
set priority
set tos
Incomplete command... use '?' for help.... exiting...
WS5000.(Cfg).PO.[Inbound]> show cg
Classification Group information...
Available Classification Groups:
1. NetVision_VoIP_In.
2. NetVision_VoIP_Out.
3. voip_in_cg.
WS5000.(Cfg).PO.[Inbound]> set addcg voip_in_cg
Configuring Policy Object...
Status: Success.
Policy Object information......
Network Policy Name
Description
Type
Default action
No of CG Associated with the Policy Object: 1
The list of CG associated:
1. voip_in_cg.
CG VlanPriority
-- ------------
voip_in_cg 0
WS5000.(Cfg).PO.[Inbound]>

8.39.2 show

Policy Object Instance
Show details about the Policy Object or related components.
Description
packet marking/ToS given as a 6-bit
101101 .
: Inbound
:
: Inbound Access Port
: Allow
TOS IP-Redirect
--- -----------
000000 0.0.0.0
Syntax
set tos <bits> <cg_name>
Pkt Modifier(s)
---------------
Disabled