Set Clear; Set Master - Symbol WS5000 Series System Reference Manual

8-166
WS5000 Series Switch System Reference Guide
Example
WS5000.(Cfg).KDC> set access cli enable
Configuring KDC access restriction for cli....
Status : Success.
Configuration Access restriction details:
Telnet access (CLI)
System access via SNMP
KDC configuration over remote console
KDC configuration through SNMP
WS5000.(Cfg).KDC> set access snmp
Enter enable/disable.
Syntax: set access snmp <enable/disable> [CR]
Incomplete command... use '?' for help.... exiting...
WS5000.(Cfg).KDC> set access snmp enable
Configuring KDC access restriction for snmp....
Status : Success.
Configuration Access restriction details:
Telnet access (CLI)
System access via SNMP
KDC configuration over remote console
KDC configuration through SNMP
WS5000.(Cfg).KDC>

8.35.8 set clear

KDC Context
Clears all KDC settings on the switch.
Syntax
set clear

8.35.9 set master

KDC Context
Sets the switch to be the Master KDC.
Syntax
set master <realm> [master_name] [domain]
Parameters
realm KDC realm name
master_name Name assigned to the Master KDC.
domain Optional domain over which the KDC has dominion.
: Disable.
: Enable.
: Enable.
: Enable.
: Disable.
: Enable.
: Enable.
: Enable.