Set; Show; Ttls - Symbol WS5000 Series System Reference Manual

8-68
WS5000 Series Switch System Reference Guide
PEAP Configurations
-----------------------------
PEAP Type mschapv2
WS5000.(Cfg).AAA.EAP.PEAP>

8.7.3 3. set

AAA EAP Context
To set the EAP type and private key password, use the set command.
This can be a table :
Eaptype set EAP authentication type to peap or ttls
set eaptype peap
Set eaptype ttls
Keypassword set password used to protect the certificate being imported
"set keypassword <value>

8.7.4 show

To display context specific attributes, use the show command. For example:
show eap-config—Display EAP information
show certs—Display Certificate information
show peap-config—Display PEAP information
show ttls-config—Display TTLS information

8.7.5 3. ttls

AAA Context
Use ttls context to configure TTLS parameters.
Syntax
ttls
Parameters
None
Example
WS5000.(Cfg).AAA.EAP> ttls
TTLS Configurations
-----------------------------
TTLS Type
WS5000.(Cfg).AAA.EAP.TTLS>
:
:
mschapv2