8.9 AAA Policy Context
AAA Policy Context
shows the AAA policy context commands.
Table 8.12 AAA Policy Context Commands
Commands
.. or end
exit
? or help
logout or bye
add
clear
emergencymode
remove
set
show
8.9.1 3. add
AAA Policy Context
To add a new WLAN to a group, use the add command.
Syntax
add wlan <group> <wlan-name>
where:
group—Name of the group to which you add the WLAN
wlan-name—Name of the WLAN for the group
Example
WS5000.(Cfg).AAA.Policy> add wlan ws5k xyz
Adding Access Policy...
Status: Success.
Warning: Please commit these changes using Save command in AAA context.
8.9.2 3. remove
AAA Policy Context
To remove a policy from a group, use the remove command.
Syntax
remove <group> <wlan>
CLI Command Reference
Description
Go back to the previous context.
Go back to root context.
To get the command information
Close this session
Add a new WLAN to a group
Clears the screen
Enable or disable Emergency Mode
Remove a Policy for a group.
set time of access policy to a Group
Display information on all policies information
8-71