Configuring Snmp V3; Modifying Snmp V3 Profiles - Symbol WS5000 Series System Reference Manual

11.1.7 Configuring SNMP v3

To configure the Wireless 5000 Series Switch with SNMP version 3, enter:
WS5100_VPN.(Cfg).SNMP>
SNMP v3 User
-------------------------------
1. snmpv3AllRW
2. snmpv3AllRO
This example displays the default user profiles available for SNMP v3.

11.1.8 Modifying SNMP v3 Profiles

To modify SNMP v3 user profiles, enter:
WS5100_VPN.(Cfg).SNMP.v3>
set profile:
Use set profile to configure SNMP v3 user profile.
Syntax:
set profile <user> <algorithm> <auth_pass> [ priv_pass ]
Where:
user
'snmpv3AllRO')
algorithm
auth_pass
priv_pass
For example, to change the profile
phrase to test1234 , enter:
WS5100_VPN.(Cfg).SNMP.v3>
v3
Auth. Priv.
MD5 DES
MD5 DES
set profile ?
User profile name (either 'snmpv3AllRW' or
'MD5' or 'SHA'.
Authentication pass-phrase.
Privacy pass-phrase, default is same as <auth_pass>.
snmpv3ALLRO from MD5
set profile snmpv3AllRO SHA test1234
Configuring SNMP
authentication to SHA and change the pass
11-7