Symbol WS5000 Series System Reference Manual page 233

Table 8.20 Access Port Instance "Set" Command Summary (Continued)
Set Command
channel Access Port transmit channel. Possible values are:
• <channel#> – Specific channel number
• auto-once – The AP uses Automatic Channel
Selection (ACS) the first time it's adopted by the
switch, and then sticks to that channel
thereafter.
• auto-always – The AP uses ACS every time it's
adopted.
• random – The AP chooses a random channel
every time it's adopted.
power Access Port transmission powe. Possible values are
4-20 dBm
muPower The amount in which associated mobile units are
told to adjust (increase) their power. Although this
is a drain on MU batteries, it can help improve
signal fidelity. The possible adjustment values are
in positive, integral dB.
location Access Port location description.
ccaMode Sets the Access Port's CCA mode. Possible values
are:
• 0 –
• 1 – Energy above threshold
• 2 – Carrier sense only
• 3 – Carrier sense with energy above threshold
ccaThreshold Sets the Clear Channel Assessment threshold,
which is the maximum level of traffic that the AP
will accept and still consider the channel to be
clear. 0 means no traffic; 31 means jam-packed.
diversity Access port diversity antenna setting. Possible
values are:
• full – The AP dynamically chooses the antenna
with the strongest signal.
• primary – Use this AP as a Primary antenna.
• secondary – Use this AP as a Secondary
antenna.
vLanId VLAN ID that the Access Port is to be part of.
clearVLanTags Clears the VLAN tag register.
Description
CLI Command Reference
AP Models Syntax
All except: set channel <value>
• AP 3020
• AP 3021
All except: set power <power_value>
• AP 3020
• AP 3021
All except: set muPower <mupwr_value>
• AP 3020
• AP 3021
All set location <location_text>
All set ccaMode <CCA_mode#>
All set ccaThreshold <value>
All set diversity <setting>
All set vLanId <vLAN_ID>
All set clearVLanTags
8-97