8.8 AAA LDAP Context
Table 8.10
shows the AAA LDAP context commands.
Table 8.10 AAA LDAP Context Commands
Commands
.. or end
exit
? or help
logout or bye
clear
emergencymode
set
show
8.8.1 3. set
AAA LDAP Context
To configure a LDAP server components, use the set command.
Table 8.11
shows the configurable attributes
Table 8.11 Configurable Attributes Using the set Command
Attribute
Description
ip
Assign Server IP.
port
Assign Server Port Number
passwd
Assign Password.
login
Assign Login Attribute.
passattr
Assign Password Attribute.
filter
Assign Group Membership Filter.
groupname
Assign Group Name Filter.
membership
Assign Group Membership Attribute.
basedn
Assign Base DN.
binddn
Assign Bind DN.
Syntax
set <config_parameter> <parameter_value>
where:
config_parameter—LDAP server parameter to be configured.
CLI Command Reference
Description
Go back to the previous context.
Go back to root context.
To get the command information
Close this session
Clears the screen
Enable or disable Emergency Mode
Configure LDAP server
Display context specific attributes
Usage
Set ip <value>
Set port <value>
8-69