Access Port Policy Instance; Add - Symbol WS5000 Series System Reference Manual

8-104
WS5000 Series Switch System Reference Guide

8.19 Access Port Policy Instance

Table 8.22 summarizes the commands within this context. Common commands between multiple contexts are
described in further detail in the
Table 8.22 Access Port Policy Instance Context Command Summary
Command
.. or end Terminate a current session and moves up a context, hierarchically.
exit Terminate a current session and returns to the "root" prompt.
? or help Get the command information.
logout or bye Close this session.

add

Add an access port policy instance
clear Clear the screen.
emergencymode Enable or disable Emergency mode.
history Display command history within a context or instance
Adds an WLAN to the Access Port Policy instance.
add
description Add a unique identifier or description to the policy instance.
The map command, depending on the specified AP hardware type, moves
map
you into a WLAN-to-BSS/ESS mapping subcontext.
name Rename an access port policy instance.
remove Remove an access port policy instance.
show Show details for the Access Port Policy instance.
set Set various configurations for the access port policy instance. This includes:
basicRates,
rtsThreshold, and
8.19.1 add
Access Port Policy Instance
Adds an Access Port Policy instance.
Syntax
add <policy_name>
Parameters
policy_name The name of the Access Port Policy being added.
Example
WS5000.(Cfg).APPolicy.[NY_APpolicy]> add WLAN_NE
Adding WLAN...
Status: Success.
Common Commands section.
Description
set beacon, set dTim, set nonSpectrumMgmt,
set supportedRates.
Ref.
page 8-5
page 8-5
page 8-6
page 8-6
page 8-104
page 8-7
page 8-7
page 8-7
page 8-104
page 8-105
page 8-105
page 8-106
page 8-107
page 8-107
set page 8-108
set np, set preamble, set