11.1 SNMP
The Wireless 5000 Series Switch supports Simple Network Management Protocol (SNMP) version 3 as well
as SNMP version 2 and version 1.
Use the
CLI context to configure the SNMP trap host and the SNMP agent status.There are two sub-
SNMP
contexts to configure:
• SNMP v2 (
context)
v2
• SNMP v3 (
context).
v3
11.1.1 set trapHost
Identifies a remote host to which this switch will send SNMP traps.
To configure the trap host, enter:
Configuring SNMP