11-2
WS5000 Series Switch System Reference Guide
WS5100_VPN.(Cfg).SNMP>
set traphost:
Syntax
set traphost <ip_address> <community_name> [port]
Parameters
ip_address
SNMP manager/trap host IP address.
community_name
SNMP community name for the trap host
port
Trap port
To configure the trap host to be the device at 192.168.204.4, the community name to be Symbol, and to use
port 162, enter:
WS5100_VPN.(Cfg).SNMP>
11.1.2 enable
Starts the SNMP daemon.
Syntax
enable
Parameter
None.
Example
WS5000.(Cfg).SNMP> enable
Enabling...
Status : Success.
SNMP details:
-------------
SNMP (deamon) Status : Enabled
SNMP Traps : Disabled
WS5000.(Cfg).SNMP>
11.1.3 disable
Stops the SNMP daemon.
Syntax
disable
Parameter
None.
Example
set traphost ?
set traphost 192.168.204.4 Symbol 162