Set Logout; Set Snmptrap - Symbol WS5000 Series System Reference Manual
Hide thumbs
Also See for WS5000 Series:
- System reference manual (728 pages) ,
- Reference manual (314 pages) ,
- Troubleshooting manual (56 pages)
Table of Contents
Advertisement
8-50
WS5000 Series Switch System Reference Guide
Serial Number
Number of Licenses
Max Access Ports
Max Mobile Clients
Active Switch Policy
Emergency Switch Policy
Switch Uptime
# of Unassigned Access Ports : 2
Unassigned Access Ports
1. 00:A0:F8:6E:4A:7A [G].
2. 00:A0:F8:BB:B3:6D [G].
WS5000.(Cfg)>
8.4.32 set logout
Configuration (Cfg) Context
Sets the CLI's auto-logout time, in minutes.
Syntax
set logout <#minutes>
Parameters
#minutes
CLI's auto-logout time, in minutes. Valid values are 0 through 1440 (24 hours). Use 0 to
disable auto-logout.
Example
WS5000.(Cfg)> set logout 10
Setting auto-logout time (10 min) for CLI.... done.
WS5000.(Cfg)> set logout 0
Disabling auto log-off.... done.
WS5000.(Cfg)>
8.4.33 set snmptrap
Configuration (Cfg) Context
Enables or disables SNMP traps, globally.
Syntax
set snmptrap <snmptrap_flag>
Parameters
snmptrap_flag
Indicates whether to enable or disable SNMP traps on the switch. Possible values are:
• enable
• disable
Example
WS5000.(Cfg)> set snmptrap enable
Setting SNMP Trap status....
: 00A0F8658C10
: 48
: 48
: 4096
: Default Wireless Switch Policy
: EmerPolicy2-10
: 09d:22h:02m
:
Advertisement
Table of Contents
