Remove - Symbol WS5000 Series System Reference Manual

11-4
WS5000 Series Switch System Reference Guide
Example
WS5000.(Cfg).SNMP> set snmptrap
Enter enable or disable.
Syntax: set snmptrap <enable/disable> [CR]
Incomplete command... use '?' for help.... exiting...
WS5000.(Cfg).SNMP> set snmptrap enable
Setting SNMP Trap status....
Status: Success.
SNMP details:
-------------
SNMP (deamon) Status : Enabled
SNMP Traps : Enabled
WS5000.(Cfg).SNMP>
11.1.6 Configuring SNMP v2

11.1.6.1 remove

Remove a SNMP client.
Syntax
remove <permission> <client_ip> <community_name> [port_no]
Parameter
permission
client_ip
community_name
port_no
The access permission of the SNMP community. Either
read-only, or for readwrite.
rw
IP address of the SNMP client.
Name of the community the client is a member of.
Optional port number. The default is
for
ro
.
161