Set Kdcconfig; Set Snmptrap; Configuring Snmp V2 - Symbol WS5000 Series System Reference Manual

WS5000.(Cfg).SNMP> disable
Disabling...
Status : Success.
SNMP details:
-------------
SNMP (deamon) Status : Disabled
SNMP Traps : Disabled
WS5000.(Cfg).SNMP>

11.1.4 set kdcConfig

Allows or disallows the configuration of the on-board Kerberos KDC through SNMP.
Syntax
set kdcConifg <enable_flag>
Parameter
enable_flag
Example
WS5000.(Cfg).SNMP> set kdcconfig enable
Setting KDC configuration rights...
Status : Success.
Configuration Access restriction details:
Telnet access (CLI) : Disable.
System access via SNMP : Enable.
KDC configuration over remote console : Enable.
KDC configuration through SNMP : Enable.
WS5000.(Cfg).SNMP>

11.1.5 set snmpTrap

Allows or disallows SNMP traps.
Syntax
set snmpTrap <enable_flag>
Parameter
enable_flag
Enable or disable Kerberos KDC configuration, as appropriate.
Possible values are:
• enable
• disable
Enable or disable Kerberos KDC configuration, as appropriate.
Possible values are:
• enable
• disable
11-3
Configuring SNMP