Ntpserver; Set Access - Symbol WS5000 Series System Reference Manual

ERROR: Command 'dir' not found in KDC context.
WS5000.(Cfg).KDC> ..
WS5000.(Cfg)> dir
Date & Time
May 5 21:33
Jan 25 15:11
Apr 23 16:18 18821897
Feb 10 17:31
May 5 21:33
WS5000.(Cfg)>

8.35.6 ntpServer

KDC Context
Removes, from the on-board KDC, a reference to an NTP server. This command can only be invoked if the
switch is configured to be the Master KDC. To add a reference to an NTP server, use
Syntax
remove ntpserver <1 | 2 | 3>
Example
WS5000.(Cfg).KDC> remove ntpserver 2
Deleting NTP Server....
Status: Success.
Time Server (NTP) details:
Primary NTP Server
First alternate NTP Server
Second alternate NTP Server
WS5000.(Cfg).KDC>

8.35.7 set access

KDC Context
Permits or denies configuration of the on-board KDC through the CLI (via telnet) and SNMP.
Syntax
set access <protocol_type> <enable_flag>
Parameters
protocol_type Defines the type of protocol to be used to configure the KDC. Possible values are:
• CLI
• SNMP
enable_flag Indicates whether access is granted or not. Possible values are:
• enable – Enable access for KDC configuration via the protocol type defined.
• disable – Disable access for FDC configuration.
Bytes File Name
1068 KerberosErrorLog.txt
15155 WS5000Defaults_v1.4.0.0-026R.cfg
WS5000_v1.4.1.0-003D.sys.img
6517 cmd_template.sym
2105 kdcTracks.krb
:
:
:
8-165
CLI Command Reference
set ntpServer.