Certificate Configuration - Symbol WS5000 Series System Reference Manual

12.2.4.4 Certificate configuration

Table 12.5 lists and describes the CLI commands used to configure the WVPN certificate loading, generation
and configuration in switch:
Table 12.5 Certificate Configuration
To CLI command used
enter certificate
Configure wvpn
cert
configuration
show the server
WS5000>show cert
certificates
Expected output
Certificate end user names:
----------------------------
server
CA Certificate Serial Numbers:
--------------------------------
781077985
show the properties of a
WS5000.(Cfg).wvpn.cert >decode cert <Certificate number>
server certificate
Expected output
Certificate Information:
Serial number: 1
Issuer: C=ZA; S=Western Cape; localityName=Cape Town;
O=Thawte Consulting cc; OU=Certification Services
Division; CN=Thawte Server CA; E=server-certs@thawte.com
Subject: C=ZA; S=Western Cape; localityName=Cape Town;
O=Thawte Consulting cc; OU=Certification Services
Division; CN=Thawte Server CA; E=server-certs@thawte.com
Valid from 838854000 to 1609459199
import a CA certificate
WS5000.(Cfg).wvpn.cert >import caCert <filename>
import Server certificate
WS5000.(Cfg).wvpn.cert >import serverCert <PKCS file>
<password> [<CA Cert filename>]
TFTP a remote file and
WS5000.(Cfg).wvpn.cert >tftpImport caCert <IP address>
<path/filename>
import a CA certificate
TFTP a remote server
WS5000.(Cfg).wvpn.cert >import serverCert <TFTP Server IP
Address> <PKCS file> <password> [<CA Cert filename>]
certificate and import
remove a CA certificate
WS5000.(Cfg).wvpn.cert > remove caCert <Certificate
number>
Configuring the WS5100 WTLS VPN
12-11