Figure 6.41 Creating an Access Port Policy—Naming the Policy (and Optionally, Choosing a Template)
2. Enter a name and description for the new Access port policy, then if desired, select Use an existing
Access Port Policy as a template.
3. Click Next. A panel for applying a WLAN(s) to the Access Port Policy is displayed.
Figure 6.42 Creating an Access Port Policy—Assigning an Available WLAN(s)
4. Select from among the Available WLANs and click the >> button to move a WLAN(s) (from 1 to 16
WLANs) to the Selected pane, and apply it to the Access Port Policy.
To create a new WLAN, click Create. See
5. Click Next. A panel for specifying WLAN policy definitions for specific AP hardware types is displayed
(for example,
Figure
6.43). Depending on the selected tab, the contents of this panel change slightly.
Creating a WLAN on page 6-28
6-37
Configuring Policies
for more details.