Reset; Set - Symbol WS5000 Series System Reference Manual

8-96
WS5000 Series Switch System Reference Guide
Syntax
name <AP_name>
Parameters
AP_name Name defined for the Access Port.
Example
WS5000.(Cfg).APort.[ap_name]> name New_AP_name
WS5000.(Cfg).APort.[New_AP_name]>

8.17.3 reset

Access Port Instance
Resets the Access Port or its radio, depending on the parameter value.
Syntax
reset <reset_flag>
Parameters
reset_flag Indicates whether to reset the access port or radio. Valid options are:
• ap – Resets the Access Port that contains this radio that's represented by this
• radio – Resets the radio that's represented by this instance.
Example
WS5000.(Cfg).APort.[ap_name]> reset radio
WS5000.(Cfg).APort.[ap_name]> reset ap

8.17.4 set

Access Port Instance
The set command includes a group of different configuration commands to "set" or change Access Port device
parameters. The set of parameters that can be set or changed depends on the AP model, as shown
8.20.
Table 8.20 Access Port Instance "Set" Command Summary
Set Command
name Set the Access Port name.
description Access Port description string.
policy Access Port policy thats applied to this Access Port.
See Access Port Policy (APPolicy) Context on page
8-101.
instance. radio
Description AP Models Syntax
All set name <ap_name>
All set description <desc_text>
All set policy <policy_name>
inTable