Common Commands; Or End - Symbol WS5000 Series System Reference Manual

• To abort an unresponsive command, type

8.2 Common Commands

Table 8.2 summarizes the commands common amongst many contexts and instance contexts within the
WS5000 Series command line interface.
Table 8.2 Common Commands Among Most Contexts
Command

.. or end

Terminate a current session and moves up a context, hierarchically.
exit Terminate a current session and returns to the "root" prompt.
? or help Get the command information.
logout or bye Close this session.
clear Clear the screen.
emergencymode Enable or disable Emergency mode.
history Display command history within a context or instance
ping Ping a network host/IP address
show Display context specific attributes
8.2.1 .. or end
Common to all contexts and instances, except System Context
Terminates the context or instance session, and changes the command prompt to be one higher.
Syntax
..
or
end
or
exit
Parameters
None.
Example
WS5000.(Cfg).NP> ..
WS5000.(Cfg)> end
WS5000>
8.2.2 exit
Common to all contexts and instances, except System Context
Terminates the context session, and returns the prompt to the root (for example,
. That is, hold down the
<Ctrl>-c
Description
8-5
CLI Command Reference
key and type .
Control c
Ref.
page 8-5
page 8-5
page 8-6
page 8-6
page 8-7
page 8-7
page 8-7
page 8-8
page 8-15
WS5000> ).