Set Licensekey; Set Location - Symbol WS5000 Series System Reference Manual

Max Access Ports
Max Mobile Clients
Active Switch Policy
Emergency Switch Policy
Switch Uptime
# of Unassigned Access Ports : 2
Unassigned Access Ports
1. 00:A0:F8:6E:4A:7A [G].
2. 00:A0:F8:BB:B3:6D [G].
WS5000.(Cfg)>

8.4.30 set licensekey

Configuration (Cfg) Context
Sets the license key for the switch. The license key, issued by Symbol, is used to determine the number of APs
and MUs that the switch is able to support.
Syntax
set licensekey <licensekey>
Parameters
licensekey The license key, issued by Symbol. The switch must be configured as "Primary" if
updating the license key.
Use the
Example
WS5000.(Cfg)> set licensekey <licensekey>

8.4.31 set location

Configuration (Cfg) Context
Sets an informational location string for where the switch is located.
Syntax
set location <string>
Parameters
location Enter a string for where the switch is located, such as the NOC city, or campus building
#, for example. This information is displayed using the show system command.
Example
WS5000.(Cfg)> set location "San Francisco"
Setting the location string....
Status: Success.
System information...
System Name
Description
Switch Location
Software Ver.
Licensed to
Copyright
: 48
: 4096
: Default Wireless Switch Policy
: EmerPolicy2-10
: 09d:22h:02m
:
set mode command to set the switch mode, if not already set as Primary.
: WS5000
: WS5000 Wireless Network
: San Francisco
: 1.4.1.0-003D
: Symbol Technologies
: Copyright (c) 2000-2005.
8-49
CLI Command Reference
All rights reserved.