Symbol WS5000 Series System Reference Manual page 114

6-34
WS5000 Series Switch System Reference Guide
Figure 6.37 Creating an Ethernet Port Policy—Specifying VLAN Support
4. When done specifying a VLAN(s), click Next. A panel for associating WLANs to its NICs (or VLANs) is
displayed (for trunk ports only).
Figure 6.38 Creating an Ethernet Port Policy—Associating WLAN toNICs (or VLANs)
Select a VLAN row in the mapping table and select the WLAN you want to map it to. Other options
include:
• To add a new arbitrary mapping click Insert, select the NIC that the VLAN will be on, specify the
VLAN ID or IP address, and select the WLAN.
• If you need to create a new WLAN, click the Create WLAN... button. See
6-28 for more details.
• To remove a mapping, select the VLAN row and click the Remove button.
5. When done, click Next. An Ethernet Policy Created Successfully! message panel is displayed.
6. Click Finish to save the new Ethernet Policy and exit the wizard.
Creating a WLAN on page