Restore - Symbol WS5000 Series System Reference Manual

None.
Example
WS5000.(Cfg)> reset
This command will reset the system.
Are you sure (yes/no) : y
System shutdown may take a few mins....
Shutting down snmpd agent.....done.
Shutting down apache server...done.
Shutting down cell controller......done.
Shutting down database main thread...done.
Rebooting the switch...
Configuring ethernet ports ...
Checking database integrity...done.
Launching auto-configuration procedure...
Waiting for DHCP lease file to be created...
DHCP lease file found.
Begin parsing DHCP lease file...
Results:
---------------------------
TFTP Server :
Command File:
---------------------------
TFTP server option not found.
Exiting auto-configuration...
Starting cell controller....done.
Waiting for the corba file to be created.......done.
Starting apache server in SSL mode...done.
Starting snmpd daemon...done.
user name:

8.4.24 restore

Configuration (Cfg) Context
Restores the specified system image and/or configuration, and then resets (reboots) the system (based on the
restore_option) with the newly restored image and/or configuration.
Syntax
restore <restore_option> <filename>
Parameters
restore_option
The type of restore to be invoked. image or configuration that you want to restore. One
of:
• system – Restores the system image and configuration from the specified file.
• configuration – Restores the configuration from the specified file.
• standby – Restores the standby configuration from the specified file.
filename
The new system image or configuration file to be restored.
Example
WS5000.(Cfg)> restore config siteconfig.cfg
This command will reset the system and boot up with the new configuration.
8-45
CLI Command Reference