Set Client; Show - Symbol WS5000 Series System Reference Manual
Hide thumbs
Also See for WS5000 Series:
- System reference manual (728 pages) ,
- Reference manual (314 pages) ,
- Troubleshooting manual (56 pages)
Table of Contents
Advertisement
8-196
WS5000 Series Switch System Reference Guide
1. domain1
WS5000.(Cfg).SNMP>
8.43.7 set client
Set SNMP client.
Example
WS5000.(Cfg).SNMP> set client rw 172.34.35.67 sfusers
Configuring SNMP client...
Status : Success.
State
Port
-----
----
1. Read/Write
161
WS5000.(Cfg).SNMP>
8.43.8 show
SNMP Context
Shows SNMP details.
Syntax
show
show configaccess
show snmpclients
show snmpstatus
show traphosts
show v3users
Parameters
None.
Example
WS5000.(Cfg).SNMP> show
SNMP details:
-------------
SNMP (deamon) Status
SNMP Traps
WS5000.(Cfg).SNMP> show configaccess
Configuration Access restriction details:
Telnet access (CLI)
System access via SNMP
KDC configuration over remote console
KDC configuration through SNMP
WS5000.(Cfg).SNMP> show snmpclients
State
Port
-----
----
1. Read/Write
161
WS5000.(Cfg).SNMP> show snmpstatus
SNMP details:
-------------
162
172.34.55.67
IP Address
----------
172.34.35.67
Display SNMP status. (Same as show snmpstatus.)
Display configured system access restrictions
Display the SNMP Client/community details
Display SNMP status
Display the SNMP trap-host details
Display the users that use SNMP v3.0
: Enabled
: Enabled
: Disable.
: Enable.
: Enable.
: Enable.
IP Address
----------
172.34.35.67
Community Name
--------------
sfusers
Community Name
--------------
sfusers
Advertisement
Table of Contents
