Install; Kdc - Symbol WS5000 Series System Reference Manual

8-42
WS5000 Series Switch System Reference Guide

8.4.17 install

Configuration (Cfg) Context
Configures the switch's failover role as Primary or Standby, and applies all settings specified in the command
file (.sym). Alternatively, this command is used to update Kerberos principles from a specified Kerberos file
(.krb), without reset.
Syntax
install <install_option> [filename]
Parameters
install_option One of:
• primary – Configures the switch to act as Primary, and applies all settings specified
• standby – Configures the switch to act as Standby, and applies all settings as
• kerberos – Updates the Kerberos principles from the settings in the filename file
filename Command (*.sym) or Kerberos (*.krb) file to execute, which contains configuration
settings. By dafault, this is command.sym.
Example
WS5000.(Cfg)> install primary
Begin command file processing...

8.4.18 kdc

Configuration (Cfg) Context
Display the Kerberos Key Distribution Center (KDC) status/settings currently applied to the switch. Also, the
context is changed to the KDC
The KDC context provides configuration options to configure the switch-resident KDC as a Master or Slave.
Syntax
kdc
Parameters
None.
Example
WS5000.(Cfg)> kdc
The system is configured as MASTER KDC.
Kerberos Realm
Interface
User count (Active + deleted)
Active users (MUs and WLANs)
Slave KDCsIP AddressDomain
--------------------------
No entry available.
List of all active KDC users (MUs & WLANs): No active Users available.
in the <filename> command file (.sym).
By default, install uses the command.sym file, if present. If "command.sym" is not
present, install will not change anything.
described for the primary parameter value.
(.krb), without reset.
Context. See page 8-162 for more details.
: realm1
: ethernet1
: 0
: 0