Classification Group Instance; Description - Symbol WS5000 Series System Reference Manual

8.23 Classification Group Instance

When you drop into a Classification Group instance, the CG's set of Classifiers and associated actions are
displayed.
Table 8.27 summarizes the commands within this context. Common commands between multiple contexts are
described in further detail in the
Table 8.27 Classification Group Instance Context Command Summary
Command
.. or end Terminate a current session and moves up a context, hierarchically.
exit Terminate a current session and returns to the "root" prompt.
? or help Get the command information.
logout or bye Close this session.
clear Clear the screen.

description

Add a text string to describe the Classification Group in more detail.
emergencymode Enable or disable Emergency mode.
name Rename a classification Group Instance.
set Set configuration parameters regarding the specific Classification Group Instance.
Parameters such as name, adding and removing classifiers, and setting actions
show Display available classification groups.
8.23.1 description
Classification Group Instance
Configures a b
rief description for the
Syntax
description <description_text>
Parameters
description_text Brief description of the
Example
WS5000.(Cfg).CG.[anotherName]> description "This is a VOIP Group"
Adding description...
Status : Success.
Classification Group information...
Classification Group Name
CG Description
No of classifiers for this CG
WS5000.(Cfg).CG.[anotherName]>
Common Commands section.
Description
Classification Group
instance
Classification Group
: anotherName
: This is a VOIP Group
: 0
CLI Command Reference
.
instance.
8-123
Ref.
page 8-5
page 8-5
page 8-6
page 8-6
page 8-7
page 8-123
page 8-7
page 8-124
page 8-124
page 8-125