Configure A Poe Schedule - NETGEAR GS316EP User Manual

- Startup Failure: The PD that is connected to the port failed to start up. In this
condition, the port does not provide power.
- Over Voltage: The port was denied power because of a over-voltage lockout.
- Under Voltage: The port was denied power because of an under-voltage
lockout.
-
Thermal Shutdown: The port detected a thermal temperature fault,
preventing the port from providing power.
• Output Power (W): The power that is delivered to the PD in watts.

Configure a PoE schedule

You can create a PoE schedule for a single port, or for multiple ports.
• PoE schedules are repeated weekly during the selected time range.
• On dates that are not included in a PoE schedule range, individual port settings
apply. For more information see Manage an individual PoE port on page 96.
To set up and enable a PoE schedule for one or multiple ports:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. Select POE.
The Power over Ethernet (PoE) page displays.
5. Select POE SCHEDULE.
The PD SCHEDULE page displays.
6. Click the button to select Single port configuration or Group port configuration.
7. Click one or more ports.
When a port is selected, the port button displays solid purple.
8. Click the Start Date field and select the date from the pop-up menu.
Your start date displays.
Maintain and Monitor the Switch
Gigabit Ethernet Plus Switches
99 User Manual