Use The Device View; Configure Poe; Configure The Global Poe Settings - NETGEAR S350 Series User Manual

S350 Series 24-Port (PoE+) and 48-Port Gigabit Ethernet Smart Managed Pro Switches
Table 20. Interface Green Mode EEE LPI History information (continued)
Field
Percentage Time spent in LPI
mode since last sample
Percentage Time spent in LPI
mode since last reset

Use the Device View

For information about the device view, see Use the Device View of the Local Browser
Interface on page 22.

Configure PoE

On model GS324TP, you can configure the global Power over Ethernet (PoE) settings and
the PoE settings for each port.
Note: For more information about PoE, see the hardware installation guide,
which you can download by visiting
netgear.com/support/download/.

Configure the Global PoE Settings

To configure the PoE settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Discover or Change the Switch IP
Address on page 12.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
Configure System Information
Description
The percentage of time spent in LPI mode during the current measurement
interval.
The percentage of time spent in LPI mode since the EEE LPI statistics were
reset.
72 User Manual