Oil Pump Disassembly - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
ENGINE DISASSEMBLY

Oil pump disassembly

- Loosen the screws (1) using a 4 mm Allen wrench and remove pump body
(2) and gasket.
- Remove the pump rotors (3) and (4) and extract the drive pin (5) to release
the gear (6).
- Remove drive gear (7) and oil suction stub (8).
Make sure to align the rotor dots (9) on assembly.
F.31
Workshop Manual Ed. 07-2012