Front Fork Removal - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
A
Workshop Manual Ed. 07-2012
FRONT SUSPENSION
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Front fork removal

Measure height "A" (it will need to be restored to original value on assembly). Set
a block under the engine and see that the front wheel is lifted from the ground
and then proceed as follows:
H10056
- remove the screws (1) and the brake line clamp on the left-hand side;
- remove the six screws (2) and the fork leg guards;
- remove the brake calliper from the L.H. fork leg loosening the two retaining
screws (3);
- remove the front wheel as described in Section "Y";
I.4