TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
2
Workshop Manual Ed. 07-2012
GENERAL PROCEDURES
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
Fuel pump removal (TC)
-
Remove the fuel tank as described in the relevant paragraph.
-
Remove the tank filler cap and pour the fuel contained in the tank into a ves-
sel of adequate capacity.
-
Use an Allen wrench to loosen the 6 screws (1) and remove the pump (2).
H00648
On assembly, make sure that the pump O-ring (3) is correctly po-
sitioned in its seat.
H02339
E.16