ENGINE REASSEMBLY
TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
Heat up the crankshaft bearing (10) and install the crankshaft (11).
Make sure both crankcase locating bushings (12) are in place.
Apply a layer of "LOCTITE 5205" on the right crankcase mating surface (13),
making sure not to obstruct the oil passage hole (14).
Workshop Manual Ed. 07-2012
H.25