Crankshaft; Crankshaft Straightness - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
Workshop Manual Ed. 07-2012
ENGINE OVERHAUL
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Crankshaft

Main journals should show no scoring or scuffing. Threads, keyways and
splines must be in good condition.

Crankshaft straightness

Place the crankshaft (1) on a stand (2) with two dial gauges (3) positioned on
the journals.
Turn the crankshaft and measure runout.
If the detected measure exceeds 0.04 mm (0.0016 in.) replace
the crankshaft.
Crankshaft
STANDARD
< than 0.02 mm
(0.00078 in.)
G.14