Gear Shift Control Assembly - Husqvarna 2013 TC 250R Workshop Manual

ENGINE REASSEMBLY
TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Gear shift control assembly

Refit the spring abutment pin (1) using a 12 mm wrench (apply Loctite 243 and
tighten to 20 Nm, 2.0 Kgm, 14.5 ft/lb).
Install ratchet (2), spring (3), washer (4) and circlip (5).
Install the selector drum (6) making sure the tab (7) locates in the recess (8) and
secure drum with its screw (9). (Apply Loctite 243, tighten to 20 Nm, 2.0 Kgm,
14.5 ft/lb, use 12 mm wrench).
Engage the spring (3).
H11119
Workshop Manual Ed. 07-2012
H.27