Headlamp Bulbs Replacement (Te) - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
C
1
B
2
3
6
ELECTRICAL SYSTEM

Headlamp Bulbs Replacement (TE)

To gain access to the healamp bulbs, proceede as follows:
- remove the upper fastening screw of the the headlamp carrier to the instrument
panuel support (A);
- push forward the headlamp carrier (B) and pull it towards the high (C) in order
to uncouple from the two lower supports;
- remove the headlamp fairing (1);
- disconnect the connector (2);
- slide off the rubber boot (3);
- release the clip (4) and remove the bulb (5).
To replace the parking light bulb (6) extract it from the inside cover.
After replacement, reverse operations for reassembly.
H11404
A
H11405
4
H11406
M.31
5
H11407
Workshop Manual Ed. 07-2012