Husqvarna 2013 TC 250R Workshop Manual page 226

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
Workshop Manual Ed. 07-2012
FRONT SUSPENSION
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
Remove the retaining ring using a flat head screwdriver.
H06873
Pull the inner tube until separating it from the outer tube.
Note: to facilitate removal, quickly (but carefully) pump the tubes back and forth
until separating them.
H06874
Remove the sealing rings and the metal rings mounted on the inner tube.
Do not reuse any metal parts after removal.
Replace them with new components.
Replace damaged sealing rings.
Washer and retaining ring may be reused if they are not damaged.
H06875
Check the rebound adjuster rod for distortion or damage.
Replace as required.
H06876
Loosen and remove the bottom valve assembly.
Replace damaged O-rings.
Replace the complete assembly (do not reuse it).
H06877
I.22