Timing Chain Tensioner Installation; Water Pump Installation - Husqvarna 2013 TC 250R Workshop Manual

ENGINE REASSEMBLY
TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Timing chain tensioner installation

Refit the chain tensioner (12) and its gasket. Tighten the two screws (13) using
an 6 mm wrench (8 Nm, 0.8 Kgm, 5.9 ft/lb).
13
Release the chain tensioner (12) using a screwdriver (turn counter clockwise).
12
13
H11353
Tighten the screw (14).
14
H11354
1

Water pump installation

Refit the water pump (1) with its gasket. Avoid using excessive force to engage
2
pump gear with intake camshaft gear. Tighten the screws (2) with a 4 mm Allen
wrench (5.5 Nm, 0.5 Kgm, 3.98 ft/lb).
2
H11355
Workshop Manual Ed. 07-2012
H.46