Timing Chain And Primary Drive Assembly - Husqvarna 2013 TC 250R Workshop Manual

ENGINE REASSEMBLY
TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Timing chain and primary drive assembly

Install the timing chain slider (1), tighten the screw (2) using a 5 mm wrench
(10 Nm, 0.1 Kgm, 7.3 ft/lb, Loctite 243) and make sure the slider moves freely.
Fit the oil pump drive gear (3) making sure the side with the dot is facing outside.
Fit the primary drive double gear (4) making sure to line up the timing dot (A)
with the shaft dot (B).
Workshop Manual Ed. 07-2012
H.32