Husqvarna 2013 TC 250R Workshop Manual page 86

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
30
29
32
Workshop Manual Ed. 07-2012
GENERAL PROCEDURES
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA
- Remove the positive power supply cable (27) of the starter motor (TE-TXC).
TE-TXC
27
H11311
- To remove the brake lever (28), use an 8 mm wrench to loosen the master
cylinder linkage (29) and a 6 mm Allen wrench to loosen the central screw
(34). Remove the lever.
28
H11312
- Loosen the upper retaining screw (31) of the shock absorber (32) with a 14
mm wrench.
31
H11313
E.26