Gear Shift Pedal And Selector Assembly Removal - Husqvarna 2013 TC 250R Workshop Manual

TE 250R - 310R 2013 I.E. / TE 310R 2013 I.E. USA
Workshop Manual Ed. 07-2012
ENGINE DISASSEMBLY
TC 250R 2013 - TC 250R 2013 I.E. USA
TXC 250R - 310R 2013 I.E. USA

Gear shift pedal and selector assembly removal

- To facilitate assembly, mark the position of the gear shift pedal (1) on the shaft.
Remove the retaining screw (2) of the gear shift pedal (1) (8 mm wrench)
and slide the pedal from the selector shaft.
- Remove the selector shaft (3) from the right-hand side.
- Remove the two screws (4) (4 mm Allen wrench and 8 mm wrench) secur-
ing the selector retaining plate (5) and remove retaining plate and ratchet
mechanism (6).
H11116
F.32